Summary

I have migrated to Printables because of the security and UX issues here at Thingiverse. You can find this model here:

https://www.printables.com/model/166838-logitech-k830-mount

Slide your Logitech Illuminated Living-Room Keyboard K830 under the coffee table for a clutter free experience when you're not using your HTPC.

Print Settings

Printer:

Ultimaker Original+

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Some supports for the overhang can be nice, but if you have really good cooling you might be able to get away without it. </p><p>Print one as is, and one mirrored.</p></div>

Post-Printing

Mount it under the table

            <div><p>Turn the table upside down. Turn your keyboard upside down, and lay it on the underside of your table top. </p><p>Place the printed mounts on each side of the keyboard. Mark their location with a pencil. Check that the keyboard is free to move out. Note that there are two small stoppers to prevent it from being pushed too far in.</p><p>Get your hot glue gun out. Move the keyboard and the mounts out of the way, and lay down a fat line of glue where one of the mounts will be. Be quick to plop down the mount, align it before it's too late, and let the hot glue set. Now put the keyboard back in place and check alignment. Readjust the position of the second mount if needed. </p><p>Glue the other mount. Turn your table back the right way around. At this point it might be necessary to then rotate your table 180 degrees in the XY plane in order for the keyboard to face in the desired direction. If that is the case, rotate the table while wearing a dunce hat.</p><p>You are now ready to enjoy a new life with a living room table that may, or, and this is the important part, may not, have a keyboard on top of it.</p></div>

How I Designed This

FreeCAD

            <div><p>I faffed about in FreeCAD a lot. You may not have the CAD files because they are embarassingly bad. But it is the end result that counts, right? Now enjoy your keyboard mount and lemmelone.</p></div>

Logitech K830 mount