Summary

Simple cover for a battery compartment. The length of the single holder pin is a bit short for my case, but it works nevertheless. Dimensions fit for a 2 AA case, but can be freely adjusted.

The holders don't have a lot of support and contact with the big plate, but it works fine for my application and they are surprisingly difficult to break off. YMMV

The code isn't pretty, but it works. Feel free to clean it up and submit a remix.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK2S</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed with PLA, slot provides sufficient flexibility to push the holder pin in by 2mm until it hits the big plate.rnrnEnable support for the holders.</p></div>

Parametric simple battery box cover