Summary

I needed a couple of funnels to use in the kitchen, and although there are many to choose from here on Thingiverse, I couldn't help but design my own. This design has ridges that keep it from sealing when used with a bottle or jar. It will always vent along the sides.

I printed it in three (3) sizes: Original, x 1.5, and x 2.0.

Print Settings

Printer Brand:

Printrbot

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Printrbot Simple Metal</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.25mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I had to change the side walls from 3 layers to 2 layers, because the model wouldn't infill correctly on larger sizes (at least with the slicer I'm using).  At 3-layer thick walls my slicer may as well have been set at 0% infill.  At 2-layers thick, everything was fine and the infill worked properly.rnrnSome day when I can justify/afford getting Simplify3D !!!  But not today.</p></div>

Funnel w/venting