Overview and Background

Overview.

This is a Cradle that holds 2 Shock fluid bottles for RC Cars. they are designed to fit the Team Losi Racing Shock Fluid (TLR) but may be compatible with other similar brands. these are printed in pieces and assembled using adhesives, i used super glue. they are designed to be expandable. there are mounting groves to attach to a shelf or underside of a desk as well as tabs to connect two together with M3 screws. i ended up gluing multiple together to make them all one piece. besides the 3 main pieces there are two supports that branch over the top. the small ones are for the end of the holders, and the big one is for the middle. if you plan to connect multiple together you can use the bigger support to connect the two as well.

Assembly.

single cradle: Very simple to assemble. you take the bottom piece and glue the front and back to each side. arrow facing the front the Front piece. then you take the supports and glue them into there respectful slots. a small support on both sides and the main support in the center.

Multiple cradles: same assembly as before but when connecting the two together you can use 2 M3 screws to connect the to one another. then instead of using two small supports ant the seam you can glue the larger seam to make it look neater. (note: i glued the entire seam where the two connected. you do not have to do this)

Lesson Plan and Activity

Requirements:

Adhesive for assembly (preferably super glue)

M3x10 screws for multiple hangers linked together.

RC Shock Fluid Hanging Cradle