Summary

3D printing to the rescue. Not sure how it broke, but this new water tap is broken within two weeks of installation . Took some measurements and good to use in one hour. File 481 is 1.5mm hole diameter and file 482 is 2.5mm diameter. Both are using M48 x 2mm .

Print Settings

Printer:

Zortrax M200

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Can be printed easily with any printer.</p></div>

Post-Printing

Design in Fushion 360 and 123D

            <div><p>Took measurements and print out. </p></div>

How I Designed This

Water Tap Replacement

            <div><p>Quick and cost saving way to replace this. </p></div>