Summary

I wanted some skull front earrings that glowed in the dark without using my glow PLA for the whole plug. All you have to do is pause the print after 10 layers and switch to a black filament.

*Lay the skulls flat on the build plate to print properly

Print Settings

Printer:

Anycubic Kossel Plus

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15-25</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print 10 layers at .2mm resolution in glow in the dark filament. Pause the printer and switch to a black filament. </p><p>These can easily be scaled to fit many different earring sizes, just avoid making them any shorter. Adjust the X and Y scale values to create smaller plugs.<br>100% = 25mm plugs or 1"<br>50% = 12.5mm plugs or 1/2"<br>25% = 6.25mm...... You get the point.</p></div>

Post-Printing

It's probably a good idea to sand smooth the grooves on the sides of the earrings and then seal them with a body safe clear sealant. Clear nail polish works just fine.

Skull front 25mm plugs