Summary

I used a large power capacitor on the output of my silent 24V power supply for my Mendelmax. I drew some rings to mount the capacitor into the bottom of my printer.

Print Settings

Printer:

Mendelmax

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3mm layer height</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>80%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used black ABS and printed them vertically (on their flat base). The slic3r-generated supports worked okay for me. I had to clean up the bores a bit but since I only needed two pieces I didn't really experiment to get the cleanest support. They could also be printed on their sides (maybe they'd come out better). </p><p>The holes are sized for M5 screws.</p></div>

36mm horizontal electrolytic capacitor mounting bracket