Summary

This peg is ready to fill your .25" (6.35mm) holes. I use it to mount light gear such as tweezers and eye protection. It's a super snug fit and will not fall out unless your holes are oversized from wear and tear.

This is a "remix" only in the sense that I got the idea for this peg and its general shape from @royimous' "Peg for Pegboard". Mine however is an original design.

I printed with an SLA printer, but I suspect this will print fine with supports on FDM.

Print Settings

Printer Brand:

Formlabs

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Formlabs Form 2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.1</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Formlabs tough resin<br>Cured 120min @60C</p></div>

Pegboard peg