Flite Test MiG-3 Hatch

This is a cowling and hatch for the Flitetest Mig-3. Printed in PLA with one perimeter and 3% infill. Channel down the bottom hold magnets to secure hatch as well as alignment for gluing.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1V1tZmMjWd1-mig-3-canopy/editv2

Version 2. has integrated canopy and a tab on the front of the hatch that will slide into the cowling to hold the front down. Magnets are used to hold the back down