Summary

The design is going to be similar to the Anakyn Skywalker lightsaber but not completely accurate.

I printed this with a glow in the dark filament (green in my case) and then painted the handle.

I uploaded the models for the handle and the laser separately together with the fully assembled one.

Print Settings

Printer:

Anycubic Kossel

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> Generic PLA                Glow in the dark green                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>You can print this straight up with no supports, care for the maximum vertical build volume of your printer!</p><p>Care to leave enough time to the plastic to fully cure, specially when you're printing the laser part.</p><p>If you are planning to scale it down you may want to correct even further for this problem.</p><p>USE A BRIM TO ENSURE BED ADHESION </p></div>

Post-Printing

Paint job

            <div><p>I painted the handle because I intend to keep it on show on my shelf.</p></div>

How I Designed This

            <p class="detail-caption"><strong>Fusion360</strong></p>

Lightsaber