Summary

Minimalist wallet. Expands to accommodate multiple cards, IDs, cash, etc. Push from one end to raise and fan contents on the other end.

Print sides A and B, or print two of side B if you can sew a band together and want a thinner wallet.

I've been using a PLA version of this daily for the past 6 months and it's still going strong.

See 'Post-Printing' details below.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.20mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>80</p></div></p>                                                    <strong>Filament:</strong> Mad Maker PLA+                Deep Sea Blue                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed with honeycomb fill and archimedean chords top/bottom.  3 shells, 4 top &amp; bottom layers.</p></div>

Post-Printing

If you can sew, print two of 'Side B' and put a band around the outside. The band should be 1" wide and ~2 " when laying flat as shown in the photo.

If you cannot sew (or don't want to), print one side A and one side B. Use 1" wide elastic to assemble as shown in photos. The elastic gets tights through the clips once doubled over. I used a thin flexible scale to push it back through and then trimmed afterward.

I'm sure that there are less expensive options out there, but the 1" elastic band that I used is from Amazon and can be found here: http://a.co/d/ff09s4q

Minimalist Wallet, Portrait