Tapping Wrench

This Item was printed in:REAL-Filament's Natural (Clear) PLA ø1.75.

Slicer: Slic3r Prusa Edition

I had a tapping bit that did not fit the current tapping wrench I have so i made one to allow me use the bit.

Quality
Layer height: 0.20mm

Shell
Perimeters: 7
Solid top layers: 7
Solid Bottom layers: 7

Infill
Infill Density: 30%
Infill Pattern: Honeycomb.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%

Speed
Print Speed: 70 mm/s.
Travel Speed: 120 mm/s.

Support
Enable Support: No.

Build plate Adhesion
Build plate adhesion type: Brim.
Brim Width: 6mm.