Summary

This is a Pokemon Go fob from the team instinct. It is intended for printing with a dual extrusion printer.

The inner (yellow) and the outer part I designed a small offset to compensate the overlap.

LICENSE: The logo itself is copyrighted by the developers of Pokemon Go.

Print Settings

Printer Brand:

Ultimaker

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p><a rel="nofollow" href="https://ultimaker.com/" target="_blank">Ultimaker 3</a></p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Innofil3D PLA                Black & Yellow                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p><strong>Possible problem:</strong>rnCura makes the first layer thicker than the others. This leads to ugly contours between the colors. rnrn<strong>Solution:</strong>rnSet the initial layer thickness to 0.1mm or lower the infill initial layer infill.rn(Setting up the thickness to 0.1mm worked for me.)</p></div>

Pokemon Go Instinct Keychain