Captain america shield - split and print and assemble

• split into 4 center parts and 15 (identical) outer parts
• added large overlapping edges (most designed to be printed without support) and every part well sized to fit into the MK2.5 and MK3 build volume

• added 4 mount base elements for a wall mound or a hand grip. The 5mm holes are in diameter of 180mm

• each 4 and 15 are screwed together by 3x12mm screws
• fill the gaps with filler, sand and paint it

Better in this way then puzzle the different sized parts.
printed in ABS, took about 10 hrs per piece, attached print settings for prusa i3 MK 2.5 / MK3