Summary

This is a case for the Kanga Products SDR Receiver PCB (Surface mount edition).

Instructions

Print the box, print the lid. Support structures should not be needed - the cutouts use the teardrops that should be self supporting. I printed mine with 100% infill as the walls arent that thick/strong as is.

Mount the board using 3 small self tapping screws to the standoffs in the box.

Enjoy!

(If you want to modify the .SCAD file, you will need the two referenced .SCAD files - these are both available from the 'ancestor' of this thing, http://www.thingiverse.com/thing:28608)

Update: Just tweaked the size of the box to make it the smallest size possible for the board to fit.
Update: Lid now finished, with strengthening 'lip' to reduce flex on the box walls

Case for Kanga Products SDR Rx PCB