Summary

This is a adapter plate to mount a 52mm quite spindle on the Shapeoko CNC mill.
Without the adapter the spindle is too high and would not reach the spoil board.

I had to drill the holes after printing, but otherwise it worked well.

Print Settings

Printer:

Multec Multirap

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>

How I Designed This

Designed usign OpenScad and printed with GCodePrintr - The 3D Print App for Android.

Custom Section

Tip: Try out GCode Simulator to check your print upfront

            <div><p>On Thingiverse: <a rel="nofollow" href="/thing:44286">http://www.thingiverse.com/thing:44286</a><br>GCodePrintr - 3D printing from an Android device<br>Homepage: <a rel="nofollow" href="http://3dprintapps.de">http://3dprintapps.de</a></p></div>

Shapeoko - Spindle Adapter Plate