Reflecta ProScan Minox film holder

A film strip holder to scan Minox spy camera¹ 9.2 mm film with a Reflecta ProScan cheap-compared-to-drum-scanners film scanner i own. This should fit both the 10T and 7200 models.

This can use eight tiny 1 mm high × 2.4 mm ⌀ neodymium magnets to hold shut, but works OK without them.

You can use the customizer to change the overall size, and the size of the magnets. With a bit of luck it will then work with other film scanners. Make sure to subtract a bit of clearance from the measured size of your original holder. When you need a mallet to go from one picture to the next the thing is too big.

Check the remixes for 110, 126 and 135 format versions of this. (The 126 is a “grandchild” derived from the 135 version.)

Put in the film with the shinier carrier side up and the matte emulsion down.

The black-and-white picture was scanned with this thing, and is the only one in the collection that DIA or GRU might have been interested in.