Reflecta ProScan 110 film holder

A film strip holder to scan six image 110 “Pocket” Instamatic film strips with a Reflecta ProScan cheap-compared-to-drum-scanners film scanner i own. This should fit both the 10T and 7200 models. Most of the strips i have are five images long, but some have six.

This can uses eight tiny 1 mm high × 2.4 mm ⌀ neodymium magnets to hold shut, but it works OK without them.

You can use the customizer to change the size to adapt to your film scanner.

This is derived from the ProScan Minox film holder. Check the description there.

Make sure the tiny posts go through the film perforations and that the frame numbers are not mirrored. The shiny carrier side of the strip should be up.