Summary

I used the f3d file of DzikuVx as base for a pair of landing skids to mount to the holes usually allocated to zip-tie the ESCs.
In the photos above the drone itself obviously is in a mid-build stage.

Main reason to design these was my large PDB which holds the ESCs and does not fit between the standoffs. That's why I mounted it below the main body and since I wanted to have some protection for the PDB, skids were the logic consequence for me.

Et voila!

Print Settings

Printer:

i3 Steel

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>not critical</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>I used 20%, just in case</p></div></p>                                                    <strong>Filament:</strong> Das Filament PLA                Infinity blue

Post-Printing

Mounting

            <div><p>The Skids fit right onto the arms. In my case the ESCs are soldered directly to the PDB so the holes for strapping ESCs to the arms were free, anyways. I fixed the skids with</p><p>8 x (M3x16mm bolt + washer + skid + arm + washer + M3 nut)</p></div>

drone landing skids