Summary

I really liked the dice that sablebadger made, so I made a hinged case for them.

The hinge and case work well, and the dice stay in place even if you shake the box around.

Holds a full set of dice, great for DnD.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.20mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> Amazon PLA                Grey                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>0.40mm Nozzle</p><p>I printed the pin on end with 9999 perimeters and a brim.</p></div>

Post-Printing

Hinge

            <div><p>Depending on your printer, you may need to file the holes out some for the pin. It will be an interference fit in the pins in the bottom. I used a hammer to tap it through and it worked great. No glue required.</p></div>                <p class="detail-title"><strong>Cover</strong></p>            <div><p>I made the cover separate from the lid to allow you to add more details. Once you have it all printed, just glue the cover to the lid.</p></div>

Dice Case (Facets Dice)