Summary

SH Sanlianhuan Ledao HeliMX 8828 Landing Skid

RC helicopter part

This spare is for the following SH helicopters:
8828 Eagle Power Heli MX
8828-1 Eagle Power Heli MX Gyro

It will also fit:

8827 X8 Pro Exceed
8827-1 X8 Pro Pioneer MX Gyro

Instructions

My first 3d print model, printed out fine.

Thing-o-matic print time per piece:

Normal: 1h 07min (estimated)
Accelerated: 31-32min (true)

It is a little more narrow than the original, because I had access to a Thing-o-matic that had only 100x100mm max printing surface.

Lenght: 93,63mm
Width: 44,40mm
Height: 16,00mm

Volume: 5,91cm2

Holes need to be drilled to exact size after printing.

NOTE:
I had to drill the holes that fix the "landing skid" to the helicopter a little bit oval just to increase the spacing(about 1mm wider) of the mounting holes to achieve a perfect fit.
(It could have been just a scale calibration problem)

This is a pretty straight forward deal what we got here:

-print
-clean up
-drill 4 holes for the screws (use 1mm for the lower, 3mm for the upper screws)
-drill/enlarge the metal rod mounting holes to 5mm diameter

SH Sanlianhuan Ledao helimx 8828 part 016 Landing Skid