Filament Straightener for 1.75 mm Fliament.

After a roll of PLA got a bad case of the kinks and would not feed through the Bowden tube any more, I came up with this handy little straightener. Hold in your hand or mount. Snaps together, no screws. Takes 4 605ZZ bearings - 5 mm x 14 mm x 5 mm.

Very handy.

The CAD files are native FreeCAD. FreeCAD is a FOSS 3D CAD modeling program that is freely available for Linux, Mac and that other OS. You can find it at http://www.freecadweb.org