Summary

Enclosure for the Photoduino Board version 3 with space for Arduino UNO. versions for Lithium Pack from Liquidware and 9V battery

Instructions

The file "Photoduino_Box_Li" is for use with a Liquidware Lithium Pack Battery, the file "Photoduino_Box_9V" is for use a 9 Volt battery

I use 3 mm acrilic (or MDF), cut with laser.

snap the parts with your board, you need the following Allen screws:

all in 3 mm of diameter.

4 of 12 mm long (for the LI version)
4 of 25 mm long (for the 9V version)
2 of 20 mm long
8 of 16 mm long
14 of 8 mm long

use the corner small pieces to ensamble, the odd pieces is for ajust the board.

The instrucction are on progress.