Foot For ProLiant ML350 G5 G6 Server, Similar to 465395-001

This is a replacement foot for a ProLiant ML350 G5 or G6 Server. The part is similar to foot model 465395-001 which costs about $5 per foot.

• This is superior to the factory version, since there is no space between the metal and the foot on this version (it is supported about 40mm beyond the indented area, whereas the factory version only has 3mm of tipping support plus the tiny plastic hooks)
• The blend file contains both the Foot and a 2mm Pad for Foot. There are separate STL files for each.
• If you have gap at the bottom of the left side of the tower, you need to attach the bottom spacer bar for the left side that shipped with the machine (The model shipped in a tower configuration). If you can't find the bar (such as if you bought it used or bought the rack conversion kit), you can use these spacers instead of the bar: Foot Support Spacer Bar For ProLiant ML350 G5 G6 Server

Pad for Foot

The 2mm pad is separate in case you rather get a rubber pad to attach to the foot. Therefore, the foot is 2mm off of the bed--your 3D printer software should move it down to the bed automatically, but if not, you must do that only if you print the 2mm pad separately or find your own pad such as a rubber pad.