Upgraded Holder for 24COB leds for Racing Drones

A version 2 of my initial design. To be printed flat. Solves the strength issues with parts printed vertically. The electric wires are supposed to be routed under the small holes. After applying hot glue it solves the durability issues.
I am also including the JST universal plug to be printed from 2 parts. Print whatever material you want. After soldering wires fill apply hot glue on the pins (insulation + strength) and assemble both parts.

Some users were suggesting the JST plug could be printer undersized (97%) from TPU that would improve the durability even more and would provide a very tight fit of the JST parallel connector.

Due to heat it is advised to print it from PETG or ABS but PLA is just fine. Maybe annealed PLA would be even better. If you are annealing PLA consider making the part 2% bigger due to shrinkage.