Summary

Yet another traffic cone.

The point of this is that most of the weight is in the base, and the actual cone part is rather thin. Yu can tip this something like 70° and it will right itself. It’s basically impossible to blow this one over, at least on a flat surface.
The mesh is for a 50 mm high version. 1:10 scale for a standard European 50 cm (night-and-day non-autobahn) cone.

Designt for 0.4 mm nozzles.

Print Settings

Printer:

GeeeTech i3 pro C

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>200 µm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>80 %</p></div></p>                                                    <strong>Filament:</strong> Herz PLA                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Don’t just rescale this for other sizes. Use the customizer or OpenSCAD.</p><p>Use high infill simply to get enough mass at the bottom. With 80 % infill it ended up weighing 3.3 g, slightly too heavy. The standard says the original should be ≥ 2.5 kg. (1:10 scale means 1:1000 volume, and  1 g in the model ≘ 1 kg for life size.)</p><p>This is designt with filament change in mind. When yu use OpenSCAD this prints out the hights for the filament change to get two white rings. For the 50 mm version these are</p><ul><li>orange→white at 13.2 mm</li><li>white→orange at 22.4 mm</li><li>orange→white at 31.6 mm</li><li>white→orange at 40.8 mm</li></ul></div>

How I Designed This

There is some design history available at my github repo.

Leitkegel