Summary

A m-ITX / m-ATX motherboard holder, designed as bare solution. This is basically a prototype of a upcoming (much bigger) project.

This is a "WHOLE" model. You have to separate subparts manually in slicing program. There are 6 objects total, to be "compatible" with 20x20 bed size (as mine).

Approximate time usage is around 3:30 hours, with brims (recommended).

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa Clone</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>Any</p></div></p>                                                    <strong>Filament:</strong> DevilDesign PETG                Galaxy Violet                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Filament parameters are just for inspiration, you can probably use any you want.</p></div>

m-ITX / mATX motherboard holder