Summary

Case for ASUS Zenfone 6 (ZS630KL) (2019 model).

Not yet tested. Feel free to test and remix using .step file imported into your favorite CAD program. Please comment if this design works!

Made for PLA.

Features:
Easy printing material
Rugged flip camera bridge
Open bottom for easy port access

EDIT 2019-9-6:
-Added hole for fingerprint sensor :p
-added chamfers for better ergonomics

How I Designed This

Watch this video tutorial

            <div><p>I used this video tutorial:<br><a rel="nofollow" href="https://www.youtube.com/watch?v=wOq5HCn-mcc&amp;t=607s">https://www.youtube.com/watch?v=wOq5HCn-mcc&amp;t=607s</a></p></div>                <p class="detail-title"><strong>Orthographic drawings</strong></p>            <div><p>Find or take a photo from each side of the phone. Use the dimensions of the phone to scale the photo to the correct size. Sketch a 2D drawing of each face.</p></div>                <p class="detail-title"><strong>Base model</strong></p>            <div><p>Import each sketch and extrude the side and top view until curved corners. Loft the corners using either rails or tangental loft.</p></div>                <p class="detail-title"><strong>Offset</strong></p>            <div><p>Offset case by .25mm for clearance. Offset an additional 1.2mm for case thickness. Stick together the offsets.</p></div>                <p class="detail-title"><strong>Cutting/finishing the case</strong></p>            <div><p>Chamfer the bottom edge for aesthetics and ergonomics. Cut out the front for the screen. Cut out holes for the buttons. Cut out a notch in the bottom to add a bit of flex for putting on the case. Cut a hole for the camera. Fillet all desired edges.</p></div>

Asus Zenfone 6 Case (ZS630KL)