Da Bomb Badge Covers

Cover your bomb up. Maybe get a hint at an unlock code.

You probably need a couple slightly longer M2.5 screws to replace the ones that hold the standoffs on from the bottom.

You need to put screws and standoffs on the screen before snapping the cover on. If you put the screen in at a 45 angle, it'll slip under the tab easier. Then use your old screws to secure the print to the screen from the bottom.

I used some M3 nylon screws/nuts for the middle holes but you might be able to print some if you don't have any. https://www.thingiverse.com/thing:3730355

INFO:
This cover was built using files from Netik (https://github.com/netik/dc27_badge).

UPDATE:
Added a screen cover specifically for flexible filament.