Summary

10.1" LCD Screen Holder and stand. The screen and HDMI (not including the VGA) controller as well as the capacitive touch screen module fit in this enclosure as well as the bottons. Yes the green is ugly. I printed this out of PETG seconds material in case it was a DUD. It wasnt and a few dimensions were altered.

Use 4G x 12mm wood screws to put it all together.

Screen and controller cost about AUD$100 from aliexpress.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Standard and fine for buttons</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                    <strong>Filament:</strong> none PETG                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>This used up the entire printing bed (250 x 250) please ensure the model is centered</p></div>

How I Designed This

The design consisted of measuring all the boards and LCD screens in detail with a caliper. This then allowed for the final design and the check for interferences

10.1 Inch LCD Screen and stand