Summary

This is the Version 2 of the dust bin for VW Polo 2018 center console. The first Version was reworked to now connect dust bin and cap much tighter. Especially the cap has been strengthened.

Print Settings

Printer Brand:

MK3

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa i3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                    <strong>Filament:</strong> any PETG                -                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>PETG recommended due to the higher temperatures in the car in summer. With PLA especially the cap can bend.   ||| ||| |||   For the dust bin cap no support or raft is needed. You can use Brim if it does not adhere to the printing bed.   ||| ||| |||   The dust bin itself also should not need any support. You can use Brim, if it does not adhere to the printing bed, but it should also be fine without.</p></div>

Dust bin for VW Polo 2018 + 2021 (Facelift) center console