Munsters Lily 2x

Lily Munster
1 of 4 models of the Munster Family

Everything should print in the orientation they are.

The Cape is printed 2 layers thick, should round easily for installation,
after installation you can hit it with a hair dryer to set the shape as you like.

The Neck will need to be glued into place
The hair can to be glued into place for extra security.
The Bat Necklace will need to be glued into place.

Anything a little loose? Add a little bit of masking tape, works great,
If too tight, scrape or sand the inside of the head to fit, This is totally dependent on how accurate your printer prints and the resolution you choose.

Arms will snap in, just push in with a twisting motion.

Supports are purely dependent on your printer.
Use Supports on the Neck.

I use acrylic paints for details, First sealant.
for the face you should be able to load up the black acrylic paint in the grooves and then just wipe away leaving sharp details.
There are 2 faces to choose from, one on each side of the head...Hair will cover the one you don't use ;)