Summary

Wallet for 7 SD Cards and 3 micro SD cards.
It's using 4 round magnets (5x2 mm) as locking mechanism and 100mm of filament as a hinge.
You have to print one Top, one Bottom and 4 Plugs.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK2.5</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>

Post-Printing

Hinge

            <div><p>Push 100mm of filament into hinge hole, and use soldering iron to plug in on both sides. Alternatively you could cut filament to right size and use some glue on both sides.<br>If hinges of both parts won't fit nicely just sand them a little or just use some knife to scrub them, a little.</p></div>                <p class="detail-title"><strong>Locking</strong></p>            <div><p>Push 4 magnets into holes (watch for right orientation) and plug them with Plugs. Plugs should not need any glue, they just gonna be kept with friction. If plugs are to big use some sanding paper, if they're to small use some glue.</p></div>                <p class="detail-title"><strong>Cards fitting</strong></p>            <div><p>If full SD Card going in (or out) a little to hard sand some plastic of small protruding elements made to keep them in.<br>If micro SD Cards won't stay inside (or are not going out easy enough) sand insides of those small crevices with folded sanding paper.</p></div>

SD Card Magnetic Wallet (7 SD, 3 micro SD)