Summary

No vitamins needed! Just print and go. This is a complete redesign. I have the original cad files, but would prefer to keep those unless either of the folks I remixed want to look at them.

I liked Perinski's modification of Andymeister's sander. Both of these designs need additional hardware. So I added a screw.

Print Settings

Printer:

Geeetech A30

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm, variable layer height max dev 0.16mm steps at 0.04mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20ish?</p></div></p>                                                    <strong>Filament:</strong> Geeetech PLA                any                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Use tree supports with a z height support offset of around 0.16mm to 0.2mm. </p><p>Set the screw at a 15%angle. The bottom might print funny, but the screws will work perfectly. </p></div>

Sanding tool with printed threads