Summary

This is a replacement part that I printed and it works just fine on my Agie Wire machines. I created mine without the angled gear teeth so there is only one common part. you will need to ream the I.D. to 15 mm and lightly file the hub O.D. to fit inside the carbide draw off roller. Also I left off the rectangular pocket on the bottom due to it being a overhang problem.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 5</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.020</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>70%</p></div></p>                                                    <strong>Filament:</strong> creality pla                doesn't matter at all

Post-Printing

Post printing requirements.. you will need 2 of these to make a working set.

            <div><p>Machine the 15 mm wide key slot in the bottom using a 1/4" end mill.<br>Enjoy a very good working gear replacement.</p></div>

Agie Wire EDM Draw off roller gear