Summary

A two start lead screw and nut test that came out to be a great fidget toy. The hollow center makes it loud, so I stuffed it loosely with paper towels to quiet it.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> any Any                any                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I recommend using a slicer modifier to have no infill in the threaded part of the leadscrew.  </p><p>Also, adjust the line width so that the thinnest walls of the leadscrew are exactly four extrusions wide for most efficient printing.  For PrusaSlicer users, this is 0.5mm.</p></div>

Thread and Nut Fidget Toy