Summary

2019-12-13 Caution! I've printed it out by myself and found out (after 13 hours) that I made a mistake and that the holes didn't fit.
I fixed it and made a test print of the specific area.
My apologies for everyone who started printing.

A remix of the front bottom unit provided by countspatula (https://www.thingiverse.com/thing:1394492) so metric head screws M3 will fit. I bought my screws from the hardware supply in Germany and the heads were too large for the holes.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10 Mini</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> Janbex PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used 100% infill in the upper pegs to have more stability.</p></div>

Front Bottom Unit - M3