Summary

I wanted to have a my pvc spool holder mounted to the wall so I designed this to do so. Can be mounted on printer if you want also.

Instructions

Print 2 wall mounts.
Cut pvc to length to give space for filament spool. 6 inches (15 cm) seems to fine for this. You need 2 of these.
cut another piece of pvc at what ever length you need for however many spool you have. I cut the pvc to 10 inches (25 cm) and it can hold at least 2 spools.
Then get 2 90 degree elbows and them both on the 10 inch (25 cm) piece of pvc on both ends.
Put 1 6 inch (15 cm) piece of pvc in to each of the 2 90 degree elbows. At this point you should have what looks like a flat U shape.
Finally you put the 1 6 inch (15 cm) piece of pvc in the wall mount and the other 6 inch piece in to the other wall mount.

TIP: You might need to screw the pvc to the wall mount if you have a lot of spools on the mount to OR you can glue it with epoxy.