Summary

Models for PS4 traveled cover .stl

Printed on Anet A8.
Layer Height 0.2mm

cover01 - 1x
cover02rl - 1x (this part need support, lay lift)
cover03 - 2x

Some little nails.

1) You must at first print every parts
2) Sitck with glue cover01 and cover03
3) Stick or heat the nails to cover01
4) Reduce the nalis and assemble cover01 with cover03
5) Done

You are going to be careful, if you assemble parts.

Print Settings

Printer Brand:

Anet

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>A8</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>0.2</p></div></p>                                                    <strong>Filament:</strong> Gembird PLA

Dualshock traveled cover {PS4}