DStike Watch v2 - top unexposed + button + holes for the RGB led

I made this because there were parts of the top surface that were exposed.

There's also the .f3d file.. but please.. if you do changes based on this, mention me...

Use dstike-top-v2 it's easier to print and looks better.

BONUS: attached here is also the dumped firmware (.bin file) in case you messed up yours :D np. in order to flash it to your device, make sure that you have esptools installed and then run this command:
esptool.py -p /dev/your-port-here -b 115200 write_flash 0x00000 extracted-fw.bin

BONUS 2: if you have the RTC version and you really wish Real Time Clock, use my latest build - dstike-220-rtc.bin

Thanks spacehuhn and spoplove.