Summary

Annoyed with couch cover always slipping off? Well slide an edge of the fabric in, tighten the clamp, and shove between the cushions.

Instructions

Used a 1in #10 bolt and nut.
The nut is squeezed into the slide (very tight fit to stay in place).
The slide is slid into the anchor
The bolt is put through the hole in the front of the anchor and threaded into the nut.
Then place an edge into the opening and tighten the bolt.
The slide will tighten on the fabric
Then slip the anchor between the cushions.
Done!
The slide is printed with our support or raft
The anchor is printed with support and no raft

Couch Cover Clamp