Summary

This is an adapter insert for a microcentrifuge for 200uL PCR tubes.

It Should be printed on a SLA printer if possible. It should be able to withstand up to 2000g force (max. on presented Cole-Palmer microcentrifuge).

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Photon</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>50 microns</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>no</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Settings for AnyCubic Aqua blue resin, 50 microns thickness are as follows: </p><p>Orient the model with top part to be printed first without support. It has more than enough bottom surface to stick properly for printing plate; 8 bottom layers 60 sec exposure; other layers 7.5 sec exposure; no infill; wash in IPA or other resin remover and cure 5-10 minutes under uv light source </p></div>

Insert for microcentrifuge