Summary

I scaled up Charlie89´s foldable design by 125% in all dimensions to hold an iPAD mini or an iPhone with a thicker case. I then added a riser to lift the stand so that a charger cable can be plugged in when it is in use with the Phone vertical. There are 2 heights, 10mm and 15mm. The riser snaps into the stand and the whole assembly still folds flat for transport.

https://www.thingiverse.com/thing:4229646/

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> Addnorth PLA                Pink                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The Addnorth PLA reel I bought was quite brittle compared to my usual Clas Ohlson. It snapped once.  I needed to print a small circle to clear the nozzle before leveling otherwise there was a small piece of hard PLA sticking out that interfered with the leveling process.</p><p>Standard Cura Ender3 Pro settings. 0.4mm nozzle, 0.2mm layer height</p></div>

Scaled up Foldable iPhone stand with riser