PVC Elbow Fittings

Designed a few quick PVC fittings for making structures with 1/2" PVC. The intent was to build a stand for a doc camera, but these fittings can be adapted for just about any applicaiton.

I originally had the tube completely split to allow for a tight fit, but the compliance of PLA made for a too loose of a fit. I modified the design to have a half split design and a flat on one side to allow for easy printing. A little blue painters tape works miracles.

The Camera mount is designed for a Logitech C270 camera to mount on the end of the PVC.

All designs are here on OnShape with full parametric control.