Summary

This is the first version of a LED light to light up the build area around the extruder.

Instructions

I used ABS plastic, an inline fuse, LED, cable and a resistor to set the correct current.. This was then wired to the spare 24V outlet on the power supply via a resistor in series to reduce the voltage and current. I used a website to determine the correct resistor once I know the voltage and current for my LED.
It still needs some work to get the correct angle so it points down a little more onto the build platform. I will also an additional one to the left side in the future.
As with work involving electricity, unplug before before working!

Flashforge Extruder Light