Cameo V2 / Pencil Mount

Modular Pencil holder for Silhouette Cameo 2 (and maybe others)

The goal is to create a light weight flexible pencil mount while keeping the pencil mostly centered and also stable.

Additional requirements:
Screw M3x16
Flat Nut M3

Files:
Pencil-Base --> The common part, you need the screw and the nut
Pencil-Base_ScrewCut --> The same as above, but to cut the thread into the plastic instead of using a nut
ToolHolderS_Base --> Basic form, cut out for your specific pen if you like
ToolHolderS_00mm --> Round form with a inner diameter
ToolHolderS_hex00 --> hex form with different diameter

HowTo:
The tip of the pencil should be around 7mm below the lowest part of the ToolHolderS

To assemble, drop the nut in the pocket or cut the threads.
Insert the M3 screw so it does not penetrate the inner part of the ToolHolderS
Insert the ToolHolderS in the PencilBase
Insert your pencil in the ToolHolderS
Fasten the screw to fix the pencil and the ToolHolderS inside the PencilBase
Insert the complete part in the mount of your cutter.