Summary

This mounting bracket is for the firewall mounted ignition coil of a 1941 Plymouth. The design is parameteric so that the diminsions can be adpapted as needed. See the instructions in the SCAD files. Requires basic metal working tools.

Instructions

ECHO: "Instructions:"
ECHO: "-render and export as dxf"
ECHO: "-open in inkscape for printing"
ECHO: "-coil circumferance is", 6.87223, "inches"
ECHO: "-scribe to sheet-metal"
ECHO: "-use shear to cut shape"
ECHO: "-trim and file all sharp edges"
ECHO: "-use punch to make mounting/tensioning holes"
ECHO: "-bend tensioning tabs,", 25.4, "mm from the edge:"
ECHO: "-roll strap to", 55.5625, "mm diameter"
ECHO: "-bend mounting tabs,", 25.4, "mm from the edge:"
ECHO: "-glue a thin strip of cork or rubber inside strap"
ECHO: "-use metal shrinker to shape outer edge of circular face cap"

1941 Plymouth Ignition Coil Mount