Summary

A rather basic Among Us keychain. Designed size is: 26.7mm (L) x 20mm (W) x 39mm (H).

Print Settings

Printer:

Labists X1 Mini

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>0.6mm and 15%</p></div></p>                                                    <strong>Filament:</strong> generic 1.75mm PLA                tested with white                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used a brim as the first test without one didn't go that well and I did lay the keychain on its back for the test print (took about 70 minutes all up), along with: layer height of 0.1mm, 0.8mm shell thickness, 42mm/s print speed at 210 deg C, 100% flow with a 0.4mm nozzle size.</p></div>

Post-Printing

Image of it printed.

How I Designed This

Designed in Tinkercad.

Among us keychain