7 Cylinders Radial Engine

I didn't designed the engine. I only mixed 2 existent models, but this mix didn't exist in thingiverse, so I decided to create it.

Here is a video https://youtu.be/p0WfWieY0UU

Let's talk about printing:
-All can be printed with a layer height between 0.12 and 0.2mm
-The infill can variate between 20 and 30%, only the thinner and smaller pieces the like connecting rods and the propeller should be printed with 100% of infill
-The majority of the pieces didn't needs supports, only the propeller, the master connecting rod, and maybe the prop housing

• Quantity of pieces:
  1 Block
  1 Prop Housing
  1 Propeller
  1 Rotor
  1 Master Connecting Rod
  1 Master Connecting Rod Locker
  1 Handle
  1 Pin
  1 Rotor Prop Link
  7 Pistons
  6 Connecting Rods

When you finish to ensamblate, put some lubricant for a smoothly movement.
If you printed this engine, please post a make!
Good print!!!