Summary

For the board I used some MDF pieces of 400 x 400 x 3 mm of that I had, leaved one from background, wiched marked and painted. For the shelves I used 11 slats of 395 x 30 x 3 mm, 4 for the perimeter (I drilled the notches of the corner pieces), I also painted and joined everything with glue, finally, I hung it on the wall.

Print Settings

Printer Brand:

XYZprinting

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>da Vinci 1.0 Pro 3in1</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>                                                    <strong>Filament:</strong> ff3dp ABS                RED / "GOLD" / BLACK                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The disadvantage may be "the background" of the board, it is necessary to bear in mind the color of the wall on which it will be hung; the pieces and the background of the board must be of a different color.</p><p>Some pieces lost quality when cut, although I amended this, it shows a bit.</p></div>

Vertical chess